Sheet Metal Processes
Subject and UNIT: Manufacturing Processes: Unit IV: Sheet Metal Processes
Clearance is the intentional space between punch cutting edge and die cutting edge for cutting operations such as blanking and piercing.
type with Advantages, Disadvantages | Sheet Metal Processes
Subject and UNIT: Manufacturing Processes: Unit IV: Sheet Metal Processes
Die is a tool used to cut or shape the material in a press. Dies are custom designed on the basis of parts to be produced.
two categories
Subject and UNIT: Manufacturing Processes: Unit IV: Sheet Metal Processes
The broad classification of sheet metal operations are under the following two categories:
Sheet Metal
Subject and UNIT: Manufacturing Processes: Unit IV: Sheet Metal Processes
Shearing is the process of cutting a portion from the sheet metal strip.
Subject and UNIT: Manufacturing Processes: Unit IV: Sheet Metal Processes
The following types of strengths in the sheet metals normally are often measured:
Introduction, Basic hand tools, Classification
Subject and UNIT: Manufacturing Processes: Unit IV: Sheet Metal Processes
The working of metal thickness from 3 mm to 5 mm with hand tools and simple machines into various forms is known as sheet metal work.
Bulk Deformation Processes | Manufacturing Processes
Subject and UNIT: Manufacturing Processes: Unit III: Bulk Deformation Processes
Solved Questions: Bulk Deformation Processes - Manufacturing Processes
Bulk Deformation Processes | Manufacturing Processes
Subject and UNIT: Manufacturing Processes: Unit III: Bulk Deformation Processes
Two mark Questions and Answers: Bulk Deformation Processes - Manufacturing Processes
Working Principle, Advantages, Disadvantages
Subject and UNIT: Manufacturing Processes: Unit III: Bulk Deformation Processes
In hydrostatic extrusion, the container is filled with a fluid. Extrusion pressure is transmitted through the fluid to the billet as shown in Figure 3.75.
Subject and UNIT: Manufacturing Processes: Unit III: Bulk Deformation Processes
Hot extrusion uses the heated bar stock that ranges in temperature from 90° C to 1,260° C depending on the material.
Subject and UNIT: Manufacturing Processes: Unit III: Bulk Deformation Processes
Extrusion is a compression forming process in which the work metal is forced to flow through a die opening to produce a desired cross-sectional shape.
Mechanical Deformation Processes
Subject and UNIT: Manufacturing Processes: Unit III: Bulk Deformation Processes
The equipment for drawing is basically of two types. 1. Draw bench 2. Bull block.